SHIPPING WITHIN USA ONLY

Majestic OCC Tonearm Cable

Type: Tonearm Cables


The Majestic is a low capacitance cable engineered for high-end analogue reproduction. Construction consists of 4 independent evenly matched cores of Japanese OCC Single Crystal Copper. Each color coded core is extruded in FEP/ Tef and spiral twisted followed by an aluminum mylar wrap combined with a silver-plated multi-strand tight pitch shield for full coverage against stray signal interference. Covering the shield are two layers of RoHS certified PVC followed by two polyethylene terephthalate(PET) monofilament sleeves. RCA’s are our newest design OCC pin ZRP-4, high conductivity connectors, which are a low mass design insulated with PTFE/Tef insulation.

Finally, The Majestic utilizes our 5-pin high purity; PTFE/ Tef insulated DIN, which internally uses our anti-stress pin construction ensuring against conductor fatigue while providing optimum performance. The Majestic will provide your system with musically significant improvements capturing the performance with greater textural detail, tonal clarity and balance. Effortless, honest and well-defined The Majestic’s reproduction of the original composition be it Classical, Jazz or Modern is true to what the artist intended.

SPECIFICATION

● Low capacitance design for analogue applications
● Insulations: FEP/Tef  Dielectric, PTFE Dielectric, fiberglass braided silicone coated breakouts, R-Flex 105C Degree PVC Jacket
● Shield: Aluminum mylar double wrap, spiral Silver OFC tight pitch
● Shield: 30cm SPOFC ground wire with 24k gold plated ground clip
● Connector Female (DIN): 1877 TAD-2 straight or TAD-3R right angle DIN, 5-pin 24k gold plated high purity copper insulated in PTFE/Tef housing
● Connector Male (RCA): 1877 ZRP-5 with OCC copper pin assembly direct 24k gold, insulated in PTFE/Tef, with a full housing design, Low profile construction
● Sleeve 1: Polyethylene terephthalate(PET) monofilament sleeve with anti-static ­fiber red
● Sleeve 2: Polyethylene terephthalate(PET) monofilament sleeve PET/PET black​

 

Deep Cryo™ Treatment
All of the conductors used in our cables undergo Deep Cryo™ treatment before the insulation is extruded over the metals. Our research has proven that the conductor—and only the conductor— benefits from cryo-treatment. Materials such as polyvinyl chloride (PVC™), Teflon™, PE, and Silicon™ can all be adversely affected by cold-temperature annealing. Cryo-treating non-conductors and insulating materials can cause them to break down and become brittle.
The purity, size, and molecular structure of each conductor determine the specific temperature within the -186ºC to - a 196ºC range that we cryo-treat it at. Zavfino’s research into cold temperature physics has proven that the absolute lowest temperature is not necessarily the best for cryo-treatment.
This is a two-stage process. In the first stage we draw the bare conductor through a ceramic die into an ultrasonic cleaning chamber that bombards the conductor with multiple ultrasonic frequencies. This emulsification process removes all debris from the surface of the wire down to the molecular level and leaves absolutely zero residues.

UltraSonic 7 High Voltage / Thermal Break-in
This is a two-stage process. In the first stage we draw the bare conductor through a ceramic die into an ultrasonic cleaning chamber that bombards the conductor with multiple ultrasonic frequencies. This emulsification process removes all debris from the surface of the wire down to the molecular level and leaves absolutely zero residues. After each individual wire is processed, we strand it into bundles and then subject the bundles to further treatment. During the second stage of the ultrasonic burn-in, we increase the voltage to a higher level that’s just below the threshold of the conductor. This adjustment in temperature allows us to get a unique “break-in effect” normally associated with cables that have had 30 to 40 hours of signal and/or current run through them.




Related Items