FREE SHIPPING on U.S. orders over $99 and $12 FLAT RATE under $99

Silver Dart Graphene Audio Interconnect

Type: Audio Interconnect


Mono & Stereo 2018 Review
Novo  2018 Review
  
The OCC Silver Dart Graphene is the culmination of 3 years development and testing using our H-Wound™ stranding technique on large gauge conductors coupled with our newly developed Graphene doped conductive dielectric.  Utilizing our H-Wound™ stranding each power core is guaranteed “Zero Strand Loss” during assembly as the final horizontal silver OCC layer not only allows for perfect pitch across the conductors but also acts as a barrier layers to prevent fallen or clipped strands during the assembly process. What this means is 100% identical cores before they are hand assembled with our custom audio connectors. 

 

SPECIFICATION

● OCC Silver /OCC  Copper conductor
● H-WOUND™ 16000 TWIST/M CONSTRUCTION
● DIELECTRIC 1: HIGH DENSITY PE (HDPE) HDPE Insulation
● DIELECTRIC 2: PTFE/TEF WRAP
● SHIELD1: SILVER PLATED DRAIN
● SHIELd 2: KAPTON CONDUCTIVE FILM
● SHIELD 3: BRAIDED SPOFC
● DIELECTRIC/SHIELD 4: GRAPHENE 1 EXTRUSION
● JACKET 1: 105˚ DEGREE ROHS/REACH PVC
● COTTON BARRIER WALL (CABLE IN CABLE)
● NON-CONDUCTIVE KAPTON FILM
● DIELECTRIC 5: GRAPHENE 2 ABSORPTION LAYER
● TPV-SYNTHETIC + PVC JACKET
● ANTI-STATIC/ ANTI-ABRASION EXTERNAL BRAID
● ZKP OCC PIN 24K GOLD RCA/ZKP
● ULTRA-SONIC 7™ THERMAL BREAKIN
● DEEP CRYO TREATMENT (-186˚C / -196˚C)

UltraSonic 7 High Voltage / Thermal Break-in

This is a two-stage process. In the first stage we draw the bare conductor through a ceramic die into an ultrasonic cleaning chamber that bombards the conductor with multiple ultrasonic frequencies. This emulsification process removes all debris from the surface of the wire down to the molecular level and leaves absolutely zero residues. After each individual wire is processed, we strand it into bundles and then subject the bundles to further treatment. During the second stage of the ultrasonic burn-in, we increase the voltage to a higher level that’s just below the threshold of the conductor. This adjustment in temperature allows us to get a unique “break-in effect” normally associated with cables that have had 30 to 40 hours of signal and/or current run through them.
Zavfino’s H-Wound™ + Zero Strand Loss:
Drawing on more than 18 years of manufacturing experience, Zavfino has developed a remarkable new technique for twisting stranded wire tightly around a central solid-core conductor. An electrical phenomenon commonly known as the “skin effect” occurs when electrons move through any solid core conductor. Higher frequencies travel along the outside (the skin) of the conductor faster than midrange and lower echelon frequencies. This results in smeared PRaT, muddled instrumental timbres, and an unnatural sound. Zavfino’s new H-Wound™ manufacturing technique negates the skin effect. Originally developed by OEMs Siemens and Klangfilm, Zavfino uses a customized transformer wire-stranding machine. We further modified the gears in this machinery to create windings at a slower RPM ratio with a much tighter pitch. This patented manufacturing process enables us to twist the wiring at the tightest pitch possible without overlapping the wire strands. Most wire-stranding machines can only fabricate windings up to a maximum of 300 twists per meter. Setting the bar far higher, Zavfino’s patented H-Wound™ cable winding machine creates a pitch rate of 14,000 to 16,000 twists per meter; which is unmatched by any other audiophile cable maker. Zavfino’s new Zero Strand Loss™ manufacturing technique protects the bundled conductors from being damaged during stripping and termination. By ensuring that each core has zero chipped, cut, or mangled strands, we can guarantee that each insulated core is 100% identical. For audiophiles, the sonic results of tighter windings and Zero Strand Loss™ conductors are cables with quieter backgrounds, remarkable timbral accuracy, lifelike PRaT, jaw dropping mid-range resolution, and superior low frequency extension. Our new H-Wound™ stranding technology allows us to protect the delicate electrical signal being transferred through our cables. Combined with Zavfino’s state of the art manufacturing techniques, our precision matched OCC Copper (Cu) and Silver (Ag) conductors used in the Silver Dart™ Series of cables bring an unequalled purity and honesty to all forms of music. The results are previously unheard details, finesse, and accuracy across the frequency spectrum.
Deep Cryo™ Treatment
All of the conductors used in our cables undergo Deep Cryo™ treatment before the insulation is extruded over the metals. Our research has proven that the conductor—and only the conductor— benefits from cryo-treatment. Materials such as polyvinyl chloride (PVC™), Teflon™, PE, and Silicon™ can all be adversely affected by cold-temperature annealing. Cryo-treating non-conductors and insulating materials can cause them to break down and become brittle.
The purity, size, and molecular structure of each conductor determine the specific temperature within the -186ºC to - a 196ºC range that we cryo-treat it at. Zavfino’s research into cold temperature physics has proven that the absolute lowest temperature is not necessarily the best for cryo-treatment.
What is Zavfino ZGRAPh-LDP GRAPHENE ?
Zavfino is the first audiophile cable OEM to integrate graphene insulation into high-end A/C power cables as a dielectric shield. After more than two years in development with a leading American graphene polymer research company, we’re proud to unveil our new proprietary ZGRAPh-LDPTM conductive shielding/dielectric, first used within our Silver DartTM OCC A/C power cable.

The results of using ZGRAPh-LDPTM

1. Superior protection from electromagnetic interference as the graphene contour moulds to our copper shields and prevents EMI spikes. The end result is improved grounding and vastly superior
signal transmission.
2. Graphene has excellent Electrostatic Discharge (ESD) properties that eliminate static electricity and tribo-electric charging; both of which can negatively a ect a power cable’s performance.
3. Graphene’s high heat de ection reinforces the dielectric by 30%. This ensures that all of Zav no’s cables that are shielded with graphene will deliver unchanged performance for decades to come.
4. Graphene creates a 100% anti-corrosive barrier that prevents the ingress of oxygen into the shield and conductors. An air-tight seal and zero corrosion further guarantees consistency of signal transfer at a molecular level and unchanged sonic performance for a lifetime of usage.

Why Zavfino’s Graphene outperforms traditional shielding:

Electromagnetic theory stipulates that a signal inside of a closed electromagnetic eld cannot be a ected by interference from an outside source.

Traditional dielectric insulation that uses braided Copper (Cu) or Mylar shields cannot ensure a perfectly closed eld. Copper braids and Mylar wraps both have gaps between their overlaid bundles and layers which inherently occur during manufacturing. Low frequency interference and high frequency noise will slip through these gaps and cause electromagnetic contamination and sonic degradation.

Zavfino’s primary goal is to keep any and all EM interference away from the signal’s transmission path.

By utilizing our extrudable graphene polymer jacket over the shield, our new ZGRAPh-LDP cover solves a myriad of electrical problems which braided shielding innately causes.

Our graphene dielectric ensures 100% coverage as it moulds itself to the traditional shield and drain of the cable. In effect, this creates a perfectly closed electromagnetic field.


    Customer Reviews

    Based on 3 reviews
    100%
    (3)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    V
    Victor D
    Silver Dart RCA cables, trust me...just get them.

    The new Zavfino SilverDarts are in place and they are really great. I mean really really great. I like equipment that performs way above it’s price point and looks good too. Audioquest Niagara 5000> Roon Nucleus Plus> LUMIN X1> Primaluna EVO400 integrated amp> Sonusfaber Venere S speakers>2 Bowers & Wilkins PV1D subwoofers. The new connectors on the cables are the best I have used. These cables are the best interconnects I have used. Took my system to the NEXT level! The blackest background ever. They are so quiet. I can turn my (tube) amp all of the way up with nothing playing and you have to almost put your ear literally on the tweeter to hear any kind of a noise. I am using some of your speaker cables with your jumpers, your other interconnects and a power cable. You guys have to be scaring the crap out of your competition. Thank you, Victor.

    G
    G.“.J.S.
    Silver Dart RCA & XLR IC cables

    Silver Dart XLR & RCA IC’s:
    Hello to Everyone,

    Before giving my comments on these items, I would like to tell you that I already got the Silver Dart SC’s 5 months ago & they’re awesome!! It took me that long to save up from my earnings. 😅
    The first thing that I noticed was the background noice was reduced significantly to almost negligible. I use tube amps. Then as with the SC’s, EVERYTHING substantially improved!!. All the different sounds - voices, musical & percussion instruments substantially became more defined & detailed. Bass became more evident but tight. Mids & highs also were more evident & detailed but not bright! & There were a lot of sounds that I’ve never heard before. The decay was markedly noticeable & very natural. Like tracks were being played live in front of you. Soundstage was deeper & wider with considerably more air between the listener & the different sounds & between the different sounds themselves. 3D Imaging was more pronounced with precise placement of all the instruments & voices. This is quite an investment for me. It’s expensive but compared to the competition at it’s level, this is a bargain!!.. I highly recommend these products for every audiophile out there!!
    Thank you Zavfino!!

    Sincerely,

    Gerry Sison

    J
    John Mark Flack
    Silver dart graphene IC

    This IC is the most expensive one I have ever owned. And, it is the best by far I have heard. Inserting this IC was highly revealing as it rid my system of a slight grainy presentation and opened up a 3D sonic presentation with crystalline clarity. These ICs are worth every penny.


    Related Items